Passer aux informations produits
1 de 9

ZONESUN

ZONESUN ZS-FAL180X9 Automatic Paste Filling, Capping & Labeling Line

ZONESUN ZS-FAL180X9 Automatic Paste Filling, Capping & Labeling Line

Prix habituel $14,965.99 USD
Prix habituel Prix promotionnel $14,965.99 USD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Voltage

Automatic Paste Filling, Capping & Labeling Line

The ZONESUN ZS-FAL180X9 integrates bottle feeding, lobe rotor pump filling, screw capping, round bottle labeling and finished-container accumulation. Designed for viscous products such as gels, creams, honey and sauces, it helps manufacturers coordinate several packaging stages in one connected line.

The main image shows jam jars and sauce bottles as application examples. Product viscosity, particle size, container dimensions, cap design and label format must be reviewed with actual samples before confirming compatibility. Suitable projects include food and sauce packaging, cosmetics and personal care products, and household liquids.

Line Configuration & Selection

  • Rotor pump filling: a 25 L hopper supplies the filling station; filling settings are selected for the product and target dose.
  • Screw capping: adjustable bottle handling and a capping chuck support matched screw-cap containers.
  • Round bottle labeling: conveyor guides and labeling rollers position compatible containers for self-adhesive label application.
  • Connected workflow: bottle feeding and end-of-line accumulation help organize container transfer between operations.

The filler is listed at 20–35 bottles/min, the capper at 20–60 bottles/min and the labeler at 25–50 bottles/min under their respective operating conditions. These are individual station ratings. Actual line output depends on the slowest operation, product viscosity, fill volume, container stability and changeover setup.

Technical Specifications

FILLING MACHINE

Model

ZS-VTRP1

Machine voltage

110/220V 50-60HZ 1KW

Filling pump

Lobe rotor pump

Filling range

About 5-5000ml

Suitable bottle size

Diameter=50-100mm Height=50-250mm

Hopper size

25L

Working speed

20-35 bottles/min

(based on filling material and filling volume)

Working height

About 850±25mm

Machine size

About 1688*1204*1800mm

Machine weight

About 200kg

CAPPING MACHINE

Model

ZS-XG16

Machine voltage

AC220V 50Hz/60Hz 1000W

Working pressure

0.4-0.6 MPa

Working speed

20-60 bottles/minute

(depending on bottle and cap size and shape)

Bottle height

30-300mm

Cap Diameter

18-70mm

Bottle Diameter

20-160mm

Size of air compressor connector

OD 8mm

Machine size

About 1930*740*1600mm

Machine weight

About 113kg

Packing SizePacking Size

About 2000*820*1760mm

Package weight

About192.5kg

LABELING MACHINE

Model

ZS-TB260R

Machine voltage

AC220V 50Hz/60Hz 1000W

Labeling capacity

25-50 bottles/min(depends on bottle size)

Suitable Bottle Diameter

Φ12-100mm

Label size

(L)20-300mm (H)15-150mm

Roll corediameter(mm)

Φ76mm(3 inch)

Roll outer diameter(mm)

Φ350mm

Conveyor Size

112*2000mm(W)

Machine size

About (L)2000*(W)820*(H)1380(mm)

Machine weight

About 180kg

Packing Size

About (L)2100*(W)890*(H)1520(mm)

Package weight

About 250kg

BOTTLE UNSCRAMBLER

Model

ZS-SP800S

Voltage

220V 50Hz200W(110V can be customized)

Bottle specifications

Square bottle/round bottle

Conveying speed

0-20 revolutions per minute(adjustable)

Dimension

About 550*550*990mm

Package size

About 1050*1000*1130mm

N.W./G.W.

About 93kg/120kg

Specifications describe individual stations. Confirm the final bill of equipment, filling range, container compatibility and installation dimensions before ordering. The source turntable specification has conflicting dimension fields, which require confirmation.

Equipment Features & Applications

Integrated Packaging Workflow

Bottle sorting, filling, screw capping, labeling and accumulation are combined in a connected production layout. The configuration can be reviewed for your product and available factory space.

Applications & Filling Parameters

Examples include cosmetics, personal care products, honey and sauces. The illustrated lobe rotor pump filler has a 25 L hopper and a listed filling range of about 5–5000 mL; the workable dose range and required parts must be confirmed for each product. The image identifies the filler as ZS-VTRP1A, while the existing specification table identifies ZS-VTRP1; confirm the supplied configuration when ordering.

Filling Station & Bottle Feeding

The illustration identifies the hopper, rotor pump, control panel, nozzle and photoelectric sensor. The adjacent feeding turntable includes a power switch and speed controller for coordinating container supply.

Screw Capping Station

The capping station includes a bottle separating plate, conveyor, bottle sensor, adjustable capping chuck and control panel. Listed operating air pressure is 0.4–0.6 MPa. Cap fit, bottle restraint and closure settings should be tested with your containers.

Round Bottle Labeling Station

The illustration shows the labeling components, positioning roller, conveyor, electric eye and operation panel. The listed ZS-TB260R supports round bottles 12–100 mm in diameter, with label size and roll specifications subject to the parameter table and sample approval.

Bottle Turntable & Speed Control

The turntable uses an adjustable speed controller and bottle outlet guide to manage container transfer. The source image contains inconsistent turntable dimension fields; confirm the actual table diameter and equipment footprint in the approved layout.

Integrated Filling & Sensor-Controlled Capping

The filling and feeding assembly helps reduce manual container handling. At the capping station, bottle detection coordinates closure operation with containers arriving on the conveyor; settings depend on the bottle and cap combination.

Label Application & Finished Bottle Accumulation

The illustrated labeling structure guides round bottles through the labeling area. Label coverage and single- or double-label arrangements require sample confirmation. A downstream accumulation turntable provides a holding area for finished containers before the next operation or collection.

Complete Line Layout

These views show the arrangement of the filling, capping, labeling and accumulation equipment. Confirm conveyor transitions, operator access, utilities and overall dimensions before finalizing the installation plan.

Frequently Asked Questions

Which products can this paste filling line handle?

It is intended for suitable viscous gels, creams, honey and sauces. Send your product viscosity, temperature and any particle information so the rotor pump, nozzle and wetted components can be checked. An application image does not confirm compatibility with every formulation.

Can the line fill jam jars and sauce bottles?

These are shown as application examples. We need container drawings or samples, target fill weight or volume, cap samples and label specifications to confirm feeding, filling, capping and labeling suitability. Particle-containing jam requires a separate product test.

What is the actual production speed?

The filler is listed at 20–35 bottles/min depending on material and dose. The capper and labeler have separate ratings. Final line capacity must be evaluated using your product, container, cap and label; individual machine maxima are not a guaranteed whole-line output.

Can one setup run different bottle sizes?

Size changes may require adjustments to guides, filling height, capping parts and labeling settings, or dedicated change parts. Each station has different size limits, so the complete container set must be checked across the entire line.

What power and compressed air are required?

The product offers 110 V and 220 V selections, while individual station specifications vary. Confirm the voltage, frequency and power arrangement for the complete line before ordering. The capper lists 0.4–0.6 MPa compressed air; required air capacity and other utilities should be included in the final configuration.

What information is needed for a custom proposal?

Provide product samples or specifications, target dose, required output, bottle and cap dimensions, label artwork and roll direction, available utilities and factory floor plan. We can then review machine selection, change parts, conveyor integration, commissioning, training and spare-parts requirements for the proposed configuration.

Get a Custom Paste Filling Line Proposal

Planning a jam, sauce, gel or cream packaging project? Send ZONESUN your product details, bottle and cap samples, label specifications, target filling volume and required output. Include your factory layout and power supply so we can review a suitable filling, capping and labeling configuration and prepare a project-specific quotation.

GET A CUSTOM SOLUTION

Afficher tous les détails