ZONESUN
ZONESUN ZS-FAL180X9 Automatic Paste Filling, Capping & Labeling Line
ZONESUN ZS-FAL180X9 Automatic Paste Filling, Capping & Labeling Line
Verfügbarkeit für Abholungen konnte nicht geladen werden
Automatic Paste Filling, Capping & Labeling Line
The ZONESUN ZS-FAL180X9 integrates bottle feeding, lobe rotor pump filling, screw capping, round bottle labeling and finished-container accumulation. Designed for viscous products such as gels, creams, honey and sauces, it helps manufacturers coordinate several packaging stages in one connected line.
The main image shows jam jars and sauce bottles as application examples. Product viscosity, particle size, container dimensions, cap design and label format must be reviewed with actual samples before confirming compatibility. Suitable projects include food and sauce packaging, cosmetics and personal care products, and household liquids.
Line Configuration & Selection
- Rotor pump filling: a 25 L hopper supplies the filling station; filling settings are selected for the product and target dose.
- Screw capping: adjustable bottle handling and a capping chuck support matched screw-cap containers.
- Round bottle labeling: conveyor guides and labeling rollers position compatible containers for self-adhesive label application.
- Connected workflow: bottle feeding and end-of-line accumulation help organize container transfer between operations.
The filler is listed at 20–35 bottles/min, the capper at 20–60 bottles/min and the labeler at 25–50 bottles/min under their respective operating conditions. These are individual station ratings. Actual line output depends on the slowest operation, product viscosity, fill volume, container stability and changeover setup.
Technical Specifications
|
FILLING MACHINE |
|
|
Model |
ZS-VTRP1 |
|
Machine voltage |
110/220V 50-60HZ 1KW |
|
Filling pump |
Lobe rotor pump |
|
Filling range |
About 5-5000ml |
|
Suitable bottle size |
Diameter=50-100mm Height=50-250mm |
|
Hopper size |
25L |
|
Working speed |
20-35 bottles/min (based on filling material and filling volume) |
|
Working height |
About 850±25mm |
|
Machine size |
About 1688*1204*1800mm |
|
Machine weight |
About 200kg |
|
CAPPING MACHINE |
|
|
Model |
ZS-XG16 |
|
Machine voltage |
AC220V 50Hz/60Hz 1000W |
|
Working pressure |
0.4-0.6 MPa |
|
Working speed |
20-60 bottles/minute (depending on bottle and cap size and shape) |
|
Bottle height |
30-300mm |
|
Cap Diameter |
18-70mm |
|
Bottle Diameter |
20-160mm |
|
Size of air compressor connector |
OD 8mm |
|
Machine size |
About 1930*740*1600mm |
|
Machine weight |
About 113kg |
|
Packing SizePacking Size |
About 2000*820*1760mm |
|
Package weight |
About192.5kg |
|
LABELING MACHINE |
|
|
Model |
ZS-TB260R |
|
Machine voltage |
AC220V 50Hz/60Hz 1000W |
|
Labeling capacity |
25-50 bottles/min(depends on bottle size) |
|
Suitable Bottle Diameter |
Φ12-100mm |
|
Label size |
(L)20-300mm (H)15-150mm |
|
Roll corediameter(mm) |
Φ76mm(3 inch) |
|
Roll outer diameter(mm) |
Φ350mm |
|
Conveyor Size |
112*2000mm(W) |
|
Machine size |
About (L)2000*(W)820*(H)1380(mm) |
|
Machine weight |
About 180kg |
|
Packing Size |
About (L)2100*(W)890*(H)1520(mm) |
|
Package weight |
About 250kg |
|
BOTTLE UNSCRAMBLER |
|
|
Model |
ZS-SP800S |
|
Voltage |
220V 50Hz200W(110V can be customized) |
|
Bottle specifications |
Square bottle/round bottle |
|
Conveying speed |
0-20 revolutions per minute(adjustable) |
|
Dimension |
About 550*550*990mm |
|
Package size |
About 1050*1000*1130mm |
|
N.W./G.W. |
About 93kg/120kg |
Specifications describe individual stations. Confirm the final bill of equipment, filling range, container compatibility and installation dimensions before ordering. The source turntable specification has conflicting dimension fields, which require confirmation.
Equipment Features & Applications

Integrated Packaging Workflow
Bottle sorting, filling, screw capping, labeling and accumulation are combined in a connected production layout. The configuration can be reviewed for your product and available factory space.

Applications & Filling Parameters
Examples include cosmetics, personal care products, honey and sauces. The illustrated lobe rotor pump filler has a 25 L hopper and a listed filling range of about 5–5000 mL; the workable dose range and required parts must be confirmed for each product. The image identifies the filler as ZS-VTRP1A, while the existing specification table identifies ZS-VTRP1; confirm the supplied configuration when ordering.

Filling Station & Bottle Feeding
The illustration identifies the hopper, rotor pump, control panel, nozzle and photoelectric sensor. The adjacent feeding turntable includes a power switch and speed controller for coordinating container supply.

Screw Capping Station
The capping station includes a bottle separating plate, conveyor, bottle sensor, adjustable capping chuck and control panel. Listed operating air pressure is 0.4–0.6 MPa. Cap fit, bottle restraint and closure settings should be tested with your containers.

Round Bottle Labeling Station
The illustration shows the labeling components, positioning roller, conveyor, electric eye and operation panel. The listed ZS-TB260R supports round bottles 12–100 mm in diameter, with label size and roll specifications subject to the parameter table and sample approval.

Bottle Turntable & Speed Control
The turntable uses an adjustable speed controller and bottle outlet guide to manage container transfer. The source image contains inconsistent turntable dimension fields; confirm the actual table diameter and equipment footprint in the approved layout.

Integrated Filling & Sensor-Controlled Capping
The filling and feeding assembly helps reduce manual container handling. At the capping station, bottle detection coordinates closure operation with containers arriving on the conveyor; settings depend on the bottle and cap combination.

Label Application & Finished Bottle Accumulation
The illustrated labeling structure guides round bottles through the labeling area. Label coverage and single- or double-label arrangements require sample confirmation. A downstream accumulation turntable provides a holding area for finished containers before the next operation or collection.

Complete Line Layout
These views show the arrangement of the filling, capping, labeling and accumulation equipment. Confirm conveyor transitions, operator access, utilities and overall dimensions before finalizing the installation plan.
Frequently Asked Questions
Which products can this paste filling line handle?
It is intended for suitable viscous gels, creams, honey and sauces. Send your product viscosity, temperature and any particle information so the rotor pump, nozzle and wetted components can be checked. An application image does not confirm compatibility with every formulation.
Can the line fill jam jars and sauce bottles?
These are shown as application examples. We need container drawings or samples, target fill weight or volume, cap samples and label specifications to confirm feeding, filling, capping and labeling suitability. Particle-containing jam requires a separate product test.
What is the actual production speed?
The filler is listed at 20–35 bottles/min depending on material and dose. The capper and labeler have separate ratings. Final line capacity must be evaluated using your product, container, cap and label; individual machine maxima are not a guaranteed whole-line output.
Can one setup run different bottle sizes?
Size changes may require adjustments to guides, filling height, capping parts and labeling settings, or dedicated change parts. Each station has different size limits, so the complete container set must be checked across the entire line.
What power and compressed air are required?
The product offers 110 V and 220 V selections, while individual station specifications vary. Confirm the voltage, frequency and power arrangement for the complete line before ordering. The capper lists 0.4–0.6 MPa compressed air; required air capacity and other utilities should be included in the final configuration.
What information is needed for a custom proposal?
Provide product samples or specifications, target dose, required output, bottle and cap dimensions, label artwork and roll direction, available utilities and factory floor plan. We can then review machine selection, change parts, conveyor integration, commissioning, training and spare-parts requirements for the proposed configuration.
Get a Custom Paste Filling Line Proposal
Planning a jam, sauce, gel or cream packaging project? Send ZONESUN your product details, bottle and cap samples, label specifications, target filling volume and required output. Include your factory layout and power supply so we can review a suitable filling, capping and labeling configuration and prepare a project-specific quotation.
